Hlavní strana

Z MAM wiki

Přejít na: navigace, hledání
 
; 
; example LED-show program for ATtiny 2313
;
; 2-color LED with 300 Ohm resistor in series is supposed to be
; connected between pins 12 (PB0, LED_X) and 13 (PB1, LED_Y).
;
; Color1 shines when LED_X is high and LED_Y is low
; Color2 shines when LED_Y is high and LED_X is low
; LED is off when LED_Y and LED_X are both low or both high


	.EQU DDRB = $17		; DDRB address
	.EQU PORTB = $18	; PORTB address

	.EQU DDRD = $17		; DDRB address
	.EQU PORTD = $18	; PORTB address

	.EQU PINB =$16

	.EQU LED_X = 0		; LED_X is on PB0, pin 12 of ATtiny2313
	.EQU LED_Y = 1		; LED_Y is on PB1, pin 13 of ATtiny2313

; Pins connected to LED are outputs, DDRx=1 (set):

	SBI	DDRB, LED_X	; SBI - Set Bit in I/O Register
	SBI	DDRB, LED_Y

	SBI DDRD, 0
	SBI PORTB, 2
GO:
	RCALL   COLOR1
	RCALL	WAIT
	SBIS	PINB, 2
	RCALL	COLOR2
	RCALL	WAIT
	RJMP	GO
;;;
;;;
;;; P R O C E D U R E S
;;;
;;;
	
SMALLWAIT:
	INC	R1				; INC - Increment
	BRNE	SMALLWAIT	; BRNE - Branch if Not Equal (Z flag) 
	RET					; RET - Return from Subroutine

WAIT:
	LDI	R16, 4			; LDI - Load Immediate
WAIT1:	INC	R1
	BRNE	WAIT1
	INC	R2
	BRNE	WAIT1
	DEC	R16
	BRNE	WAIT1
	RET
	
COLOR1:
    SBI	PORTB, LED_X
	CBI	PORTB, LED_Y	; CBI - Clear Bit in I/O Register
	RET

COLOR2:
    SBI	PORTB, LED_Y
	CBI	PORTB, LED_X
	RET

COL3W:
	LDI	R16, 2
COL3X: 	RCALL	COLOR1
	RCALL	SMALLWAIT
	RCALL	COLOR2
	RCALL	SMALLWAIT
	INC	R2
	BRNE	COL3X
	DEC	R16
	BRNE	COL3X

DARK:
    CBI	PORTB, LED_X
	CBI	PORTB, LED_Y
	RET

	



led:SBIS PINB,LED_X
	SBI	PORTB,LED_X
	CBI	PORTB,LED_X
	RET


Osobní nástroje